Durlon® 8400
Durlon®
Durlon® 8400 contains high temperature phenolic fibers and minerals combined with high-grade nitrile (NBR) rubber. It exhibits higher temperature limits than aramid based materials and the handling and cutting characteristics are greatly improved than carbon and glass fiber products.
Downloads
Applications
- Steam
- Mild caustics and acids
- Pulp and paper
- Chemical plant
- Water and wastewater
- Mining
Specifications
Technical Data
| Color | Gold |
|---|---|
| Temperature | Minimum: -100°F (-73°C), Continuous: 554°F (290°C), Short term: 800°F (427°C) |
| Pressure | 1500psi |
| Density | 1.7g/cc (106lbs/ft³) |
| Compressibility | 8-16% |
| Recovery | 50% |
| Creep Relaxation | 25% |
| Tensile strenght | 12.4MPa (1800psi) |
| pH | 2-13 at room temp. |
| Volume Resistivity, ASTM D257 | 3.1 x 10^13ohm-cm |
| Dielectric breakdown, ASTM D149 | 14.6kV/mm |
| Gasket factor m | 1/16": 2.9, 1/8": 4.5 |
| Gasket factor y | 1/16": 2140psi, 1/8": 3967psi |
| Gasket factor Gb | 1/16": 380psi, 1/8": 391psi |
| Gasket factor a | 1/16": 0.311, 1/8": 0.321 |
| Gasket factor Gs | 1/16": 0.01psi, 1/8": 0.014psi |
| Flexibility, ASTM F147 | 8x |
N.B. The information presented may differ from practice. We recommend conducting tests according to the conditions of use. We accept no responsibility for results obtained by the application of this information or the safety and suitability of our products. The data is subject to certain variations without notice.
